HP Designjet 2800/3800cp Service Manual - Page 105
If This Test Passes, Do Not Replace The Front-panel, Passes
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
D07. Front Panel The purpose of this test is to verify the operation of the front-panel keys. IF POSSIBLE ALWAYS PERFORM THIS TEST BEFORE REPLACING THE FRONT-PANEL ASSEMBLY. IF THIS TEST PASSES, DO NOT REPLACE THE FRONT-PANEL ASSEMBLY. Perform the Front Panel test as follows: 1 In the Diagnostics submenu, scroll to "D07 Front Panel" and press Enter. Diagnostics D07 Front Panel 2 All the LEDs on the front-panel will illuminate and you will be requested to press each key on the front panel separately. If you do not press the required key within 10 seconds, the "D0701 Fail" message is displayed on the front-panel. 3 If all the keys are pressed and the test passes, the "D0700 OK" message is displayed on the front-panel and all the LEDs on the front-panel will go out. IF THIS TEST PASSES, DO NOT REPLACE THE FRONT-PANEL ASSEMBLY. 4 If any of the keys are pressed but not recognized then the test has failed and the "D0701 Fail" message will displayed on the front-panel after 10 seconds. If the test fails, to resolve the problem, try one of the following: 1 Check that the cable for the Front Panel Assembly is connected to the Electronics Module. 2 Replace the Front Panel Assembly ' page 8-24. Service Tests HP DesignJet CP Series Printers 4-19