HP Designjet 2800/3800cp Service Manual - Page 63
Perform the Service Accuracy Calibration
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
System Error: 040601 Problem Description: The MIO card does not support the MIO 6 protocol. Cards with version 5 or below can not be used with this plotter. Version 5.1 cards behave as expected but do not support PML instructions. Install the latest version. Corrective Action: Install the latest version of the MIO Card. System Error: 050000 Problem Description: The Line Sensor has problems finding the Mark Encoder. Corrective Action: Try the following: D Clean the Mark Encoder if necessary. D Make sure the Line Sensor is installed and connected correctly. D Perform the Service Accuracy Calibration ' Page 5-17. D Replace the lens cover which is installed on the line sensor. D Replace the Trailing Cable ' Page 8-36. D Replace the Carriage Assembly ' Page 8-42. D Replace the Electronics Module ' page 8-6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. 2-28 HP DesignJet CP Series Printers System Error Codes