HP Designjet 2800/3800cp Service Manual - Page 86

Message Explanation and Action STATUS Ready The printer is ready to print. Send a file to the printer. STATUS Ready for media The printer is ready for you to load media. Load appropriate media. STATUS Receiving The printer has received data. Wait for further messages. STATUS Recovering printhds. The printer is recovering the printheads after an ink system replacement process (only for UV Pigmented inks), or you have initiated the printhead recovery procedure under Utilities / Service Tests/ Recover Printheads. Wait for the printhead recovery procedure to complete. STATUS Refilling X m XX s The printer is filling the printheads. (This message only applies to firmware revision levels A.02.08 or higher.) Wait for the process to complete. STATUS Returning printheads The ink system replacement process has been cancelled, and the printhead carriage is returning to its station at the right of the printer. Wait until the carriage is in position. STATUS Roll feed edge trim The printer is trimming the edge of roll media. Wait until the media has been trimmed. STATUS Waiting nest Nesting is turned on. The printer is waiting for another print to nest. Send the printer another file for printing. 3-18 HP DesignJet CP Series Printers User Messages