HP Designjet 2800/3800cp Service Manual - Page 120

D19. Hard Disk Drive Revision (Only available in DesignJet 2500CP/3500CP printer) The purpose of this test is to show the revision of the internal Hard Disk Drive. Perform the HDD Revision test as follows: 1 In the Diagnostics submenu, scroll to "D19 HDD Revision" and press Enter. Diagnostics D19 HDD Revision 2 A message similar to the following will be displayed on the front-panel. D19 HDD Revision D1900 Done XX_XX_XX: The following table shows the compatibility between the Hard Disk Drive Revision and the Firmware Revison: NOTE FOR HP DESIGNJETS 2500CP ONLY IF THE HARD DISK VERSION IS LOWER THAN A.02.08 THEN YOU MUST INFORM THE CUSTOMER TO ORDER THE UV UPGRADE KIT BY FAXING THE SHEET THAT THEY RECEIVED WITH THE PRINTER INFORMING THEM ABOUT THE UV UPGRADE KIT. THEY CAN ALSO FAX THE SHEET ON THE FOLLOWING URL: http://www.hp.com/go/designjet YOU CAN ALSO ORDER THE FIRMWARE UPGRADE KIT WHICH INCLUDES A CD-ROM TO UPGRADE THE HARD DISK DRIVE CONTENTS (REFER TO CHAPTER 7 FOR THE PART NUMBER). 4-34 HP DesignJet CP Series Printers Service Tests