HP Designjet 2800/3800cp Service Manual - Page 46

D If the Error is related to the Refill Stepper Motor then replace the Refill Assembly ' Page 8-55. D If the Error is related to the Primer Stepper Motor then replace the Primer Assembly ' Page 8-29. D If the Error is related to the Service Station Stepper Motors then replace the Service Station Assembly ' Page 8-26. D If the Error is related to the Bail Stepper Motor then replace the Bail Stepper Motor Assembly ' Page 8-62. D Replace the Electronics Module ' page 8-6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: Problem Description: Corrective Action: 010036 (see next page for 010036 0000XX00) ADC Test Failure in the Main PCA. Try the following: D Switch the Printer OFF from the back and then disconnect the Trailing Cable from the Electronics Module. Switch the Printer ON and see if the Error Code now changes to "010037". If the error code remains as "010036", replace the Electronics Module ' page 8-6. D If the Error Code changes to "010037" then try the following: S Make sure that the Trailing Cable is connected correctly. S Replace the Trailing Cable ' page 8-36. S Replace the Carriage Assembly ' page 8-42. System Error Codes HP DesignJet CP Series Printers 2-11