HP Designjet 2800/3800cp Service Manual - Page 281

Starguard Assembly Refer to figure 21 ' page 8-61 WARNING Switch off the printer and remove the power cord. Removal 1. Remove the following: 1. Window and Top Cover ' page 8-15. 2. Left Hand Cover ' page 8-18. 3. Right Hand Cover ' page 8-21. 4. Refill Assembly ' page 8-55 2. Remove the two T-20 screws (item 1) securing the starguard assembly (item 2) to the right hand side chassis. 3. Remove the two T-20 screw securing the starguard assembly to the left hand side chassis. 4. Slide out the starguard assembly. Installation 1. Install the starguard assembly into the correct position in the printer. 2. Install the two T-20 screws (item 1) securing the starguard assembly (item 2) to the right hand side chassis. 3. Install two T-20 screw securing the starguard assembly to the left hand side chassis. 4. Install the following: 1. Refill Assembly ' page 8-55 2. Right Hand Cover ' page 8-21. 3. Left Hand Cover ' page 8-18. 4. Window and Top Cover ' page 8-15. 5. Connect the power cord. 8-60 HP DesignJet CP Series Printers Removal and Installation