HP Designjet 2800/3800cp Service Manual - Page 311

Media Button (Only Applicable to HP DesignJets 3500CP and 3000CP) Refer to figure 30 ' page 8-91 Removal WARNING Switch off the printer and remove the power cord. 1. Remove the Media Guide (item 1) from the Overdrive Assembly by unclipping it from underneath. 2. Remove the two screws (item 2) securing the Media Button (item 3) to the Overdrive Assembly. 3. Carefully pull out the Media Button (item 3) and disconnect it from the Media Button Cable (item 4). Installation 1. Connect the Media Button (item 3) to the Media Button Cable (item 4). 2. Install the two screws (item 2) that secure the Media Button (item 3) to the Overdrive Assembly. 3. Install the Media Guide (item 1) by clipping it onto the Overdrive Assembly. 8-90 HP DesignJet CP Series Printers Removal and Installation