HP Designjet 2800/3800cp Service Manual - Page 64
Incorrect Line Sensor type in the EEROM., Incompatible Firmware and Carriage PCA.
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
System Error: Problem Description: Corrective Action: 060000 The Line Sensor is not functioning properly because there is too much ambient light. Try the following: D Close the Window if it is open. D Move the printer to a location with less light. The Printer MUST be kept away from direct intense sunlight or a spotlight. D Replace the Trailing Cable ' Page 8-36. D Replace the Carriage Assembly ' Page 8-42. D Replace the Electronics Module ' page 8-6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: Problem Description: Corrective Action: 060100 Incorrect Line Sensor type in the EEROM. Try the following: D Calibrate the Line Sensor ' page 5-10. D Clear the EEROM ' page 4-32 and perform all the calibrations again. D Replace the Electronics Module ' page 8-6 and perform all the calibrations again. System Error: 060200 Problem Description: Incompatible Firmware and Carriage PCA. Corrective Action: Upgrade the Firmware. System Error Codes HP DesignJet CP Series Printers 2-29