HP Designjet 2800/3800cp Service Manual - Page 51
DesignJets 3500CP and 3000CP., Make sure that the Media Sensor/Media
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
D If the Error is related to the Elevator Sensor then replace the Elevator Assembly ' Page 8-52. D If the Error is related to the Service Station Sensor then replace the Service Station Assembly ' Page 8-26. D If the Error is related to the Media Sensor/Media Button then: The Media Button is only applicable to HP DesignJets 3500CP and 3000CP. S Make sure that the Media Sensor/Media Button is installed correctly. S Make sure that the cable for the Media Sensor/Media Button is connected correctly. S Replace the Media Sensor ' Page 8-78. S Replace the Media Button ' Page NO TAG. D If the Error is related to the Primer Sensor then replace the Primer Assembly ' Page 8-29. D Replace the Electronics Module ' page 8-6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: 010043 Problem Description: Problem with the Carriage Board. Corrective Action: Try the following: D Make sure that the Trailing Cable is connected correctly. D Replace the Carriage Assembly ' page 8-42. D Replace the Electronics Module ' page 8-6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. 2-16 HP DesignJet CP Series Printers System Error Codes