HP Designjet 2800/3800cp Service Manual - Page 95
Carriage Failure, In this case, Perform the Printhead Continuity test
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Carriage Failure If there is a problem with the components within the Carriage Assembly then the following message will appear. D "D0106 Fail" - The problem could be related to several areas. In this case, try one of the following: 1 Remove the Printheads and clean the flex contacts on the Carriage and the Printheads. Reseat the Printheads and try the test again. 2 Perform the Printhead Continuity test ' page 4-29 to see if any of the Printheads are having a continuity problem. If any of the Printheads are having a continuity problem, replace the complete Ink Delivery System of that color. 3 Replace the complete Ink Delivery System of each color one by one, performing this test each time. 4 Check and if necessary replace the Trailing Cable ' page 8-36. 5 Replace the Carriage Assembly ' page 8-42. Service Tests HP DesignJet CP Series Printers 4-9