HP Designjet 2800/3800cp Service Manual - Page 240
Installation, Perform D08 Sensors Service Test
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Installation 1. Open the door on the left hand cover (item 1). 2. Ensuring the cover sensor cable (item 5) is not trapped, install the left hand cover (item 7) into the correct position on the chassis. 3. Install three T-15 screws (item 6), securing the left hand cover to the left hand side chassis. 4. Install the cover sensor (item 5) onto the left hand trim assembly (item 2) by pushing it onto the retaining clips. 5. Install the left hand trim assembly in position, making sure the cover sensor cable is not trapped 6. Install four T-15 screws (item 3) and one T-20 screw (item 4) securing the left hand trim assembly. 7. Close the door of the left hand cover. 8. Install the following: 1. Window and Top Cover ' page 8-15. 9. Install the ink delivery system (Refer to the User Guide). 10. Connect the power cord and turn the printer on in service mode. 11. Perform D08 Sensors Service Test ' page 4-20 Removal and Installation HP DesignJet CP Series Printers 8-19