HP Designjet 2800/3800cp Service Manual - Page 50
Problem with the Service Station Sensor.
View all HP Designjet 2800/3800cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
System Error: Problem Description: Corrective Action: 010042 0000000X The status of one of the optical sensors is not stable when it should be. Error data (X): 0 ³ Problem with the Media Sensor. 1 ³ Problem with the Pinch-arm Sensor. 2 ³ Problem with the Refill Assembly Sensor. 3 ³ Problem with the Elevator Sensor. 4 ³ Problem with the Service Station Sensor. 5 ³ Problem with the Primer Sensor. Try the following: D Make sure that all sensors are connected correctly. D If the error code is related to the Service Station or the Primer then: S Make sure that the Service Station Interconnect Cable (the black cable that connects the Service Station to the Electronics Module) is correctly connected to the Electronics Module. S Replace the Service Station Interconnect cable ' Page 8-87. D If the error code is related to the Refill Assembly or the Elevator then: S Make sure that the Refill Interconnect Cable (the black cable that connects the Refill Assembly and Elevator to the Electronics Module) is correctly connected to the Electronics Module. S Replace the Refill Interconnect cable ' Page 8-87. D If the Error is related to the Pinch-arm sensor then replace the Pinch-arm Sensor ' Page 8-84. D If the Error is related to the Refill Assembly Sensor then replace the Refill Assembly ' Page 8-55. System Error Codes HP DesignJet CP Series Printers 2-15