HP Designjet 2800/3800cp Service Manual - Page 48

Primer Elevator 46  20% 52  20% System Error: Problem Description: Corrective Action: 010037 ADC Test Failure in the Carriage PCA. Try the following: D Make sure that the Trailing Cable is connected correctly. D Replace the Trailing Cable ' page 8-36. D Replace the Carriage Assembly ' page 8-42. D Replace the Electronics Module ' page 8-6. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: Problem Description: Corrective Action: 010038 A Printhead voltage could not be set - Main PCA Failure. Try the following: D Make sure that the Trailing Cable is connected correctly. D Replace the Trailing Cable ' page 8-36. D Replace the Electronics Module ' page 8-6. D Replace the Carriage Assembly ' page 8-42. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error Codes HP DesignJet CP Series Printers 2-13