HP Designjet 2800/3800cp Service Manual - Page 77

Message Explanation and Action MIXED INK SYSTEM 88xxxx The printer has earlier detected components of different ink system types (for example, Imaging and UV Pigmented). Printing will be disabled until the ink systems are all of the same type. The error code "88xxxx" indicates a mixed ink system error. Press the Replace Ink System key to replace the erroneous ink systems in order to print with your printer again. You can press the Enter key to access the main front-panel menu. No code for UV inks Continue→ Open left door to access ink cartrg. The printer does not have the correct firmware for the HP DesignJet CP ink system UV currently installed. (This message only applies to firmware revision levels A.01.xx.) Press ↓ to continue, and reinstall the HP DesignJet CP Ink System (Imaging ink system) back into the printer. Access the menu Utilities / Statistics / Code rev to confirm the firmware revision present. If you have a code revision like A.01.xx, you need to upgrade your firmware to code revision A.02.08 or higher to use the HP DesignJet CP Ink System UV. You are doing an ink system replacement. Open the left door to access the ink cartridges. Open right door to You are doing an ink system replacement. access head cleaners Open the right door to access the printhead cleaners. Open window to access printheads You are doing an ink system replacement. Open the window to access the printheads. Out of disk space Data was lost (HP DesignJet 2500CP/3500CP only) The current print file is too large for the printer's memory. Try lowering the resolution of the file you are attempting to print, or otherwise reducing its complexity. OUT OF INK JJ-J→ The printer has detected that the amount of ink in the ink systems indicated by one or more flashing squares, is below acceptable limits for satisfactory printing. Press ↓ to check the indicated ink systems. Out of memory Data was lost The current file is too large for the printer's memory; the printer has run out of disk space for processing the file. To print files of this size, you may need to install more memory to your printer. Press ENTER when done The printer is waiting for you to confirm an action or selection. When you have taken the appropriate action press the Enter key. User Messages HP DesignJet CP Series Printers 3-9