HP Designjet 2800/3800cp Service Manual - Page 302

Roll Cover and Roll Feed Assemblies Refer to figure 27 ' page 8-83 Removal WARNING Switch off the printer and remove the power cord. 1. Remove the following: 1. Window and Top Cover ' page 8-15. 2. Left Hand Cover ' page 8-18. 3. Right Hand Cover ' page 8-21. 4. Service Station Assembly ' page 8-26. 2. Remove the spindle assembly (item 1) by pulling it towards you on the right side. WARNING The two springs on the roll cover are under high tension. 3. Remove the two T-10 screws (item 2) securing the two springs (item 3) onto the roll cover (item 4) 4. Loosen the two nuts (item 5) on the adjustment bracket on the left side to remove the cover. 5. Remove the three T-20 screws (item 6) securing the left hand roll feed assembly to the left hand side chassis. 6. Remove the three T-20 screws (item 7) securing the right hand roll feed assembly to the right hand side chassis. Removal and Installation HP DesignJet CP Series Printers 8-81