HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 141

Chapter 7 MtcEthP and MtcEtx Messages IOPn.MtcEtx status: Error accessing data in the Registry. Severity Error Description During initialization, MtcEtx reads NIC binding information and optional parameter values from the Windows NT Registry. This message is logged if MtcEtx is unable to read the Registry. MtcEtx fails initialization because the NIC binding information is unavailable. Action Run the Network Control Panel application. • Remove the MtcEtx service. • Reboot the IOP. • Reinstall the MtcEtx service. • Reboot the IOP. Refer to Chapter 9 in HP NetServer AA Solution Administrator's Guide for information about how to reboot an IOP. IOPn.MtcEtx status: Error in NIC bindings; initialization aborted. Severity Error Description This message is logged during initialization, when MtcEtx verifies the NIC bindings for the IL adapter. It is generated if MtcEtx is not bound to a single NIC, and indicates that there is an error in the bindings that were established in the Network Control Panel application. Action Run the Network Control Panel application and modify the bindings. IOPn.MtcEtx status: Error transferring incoming Ethernet packet to the receive buffer. Severity Warning Description The IL adapter was unable to copy an Ethernet packet to a receive buffer owned by MtcEtx. The Event Viewer Data section contains the Windows NT (NdisTransferData) error code. This message is usually logged because the NIC was reset while a receive was in progress. 131