HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 325

Chapter 14 MtcScsiP and MtcScsiR Messages IOPn.MtcScsiP status: DISKn cannot be accessed for initialization, and it will be marked offline. Variables n - the disk number; for example, DISK0, DISK1, DISK2 Severity Error Description A disk cannot be accessed for initialization. Check the event log for prior related messages. The problem should be corrected as indicated by these prior messages. The disk cannot be brought online using the HP NetServer AA Manager without first correcting the problem and rebooting the IOP. Action Review the event log, looking for previous entries to determine why the disk cannot be initialized. IOPn.MtcScsiP status: DISKn cannot be physically accessed. See prior events for reason. Variables n - the disk number; for example, DISK0, DISK1, DISK2 Severity Warning Description There are a variety of reasons for the inability to physically access a disk. For example, it could be misconfigured, it could be powered off, or it may have failed. Action Review the event log, looking for previous messages that describe the reason why the disk cannot be accessed. IOPn.MtcScsiP status: DISKn contains an invalid partition table. The disk must be repartitioned. Variables n - the disk number; for example, DISK0, DISK1, DISK2 Severity Error Description A CE boot disk is used to allow Windows NT to be loaded and run on behalf of the CEs. If the CE boot disk is not properly partitioned, then Windows NT will not boot. The disk specified in the message was not partitioned properly. Action Repartition the disk. See Chapter 9 in HP NetServer AA Solution Administrator's Guide for details about repartitioning a mirrored disk. 315