HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 281
This message is generated as a result of a software configuration error.
View all HP NetServer AA 6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Chapter 13 MtcMon Messages IOPn.MtcMon status: The boot process has failed for CEx because the 16-bit platform initialization did not complete successfully. Variables x - the ID of the booting CE Severity Error Description The specified CE could not be booted because the 16-bit platform initialization process failed. This process is performed via a module uploaded from the IOP and is based on the CE hardware platform specified during IOP installation of the Endurance software. Related Messages IOPn.MtcMon status: CEx has been removed from service. Hardware/Software This message is generated as a result of a software configuration error. Action • Reinstall the Endurance software on the IOP that generated this event log entry. • When prompted, be sure to specify the hardware platform that matches the CE hardware type. • If the problem persists, record the error information displayed on the CE during boot, and contact your service provider for assistance. IOPn.MtcMon status: The boot process has started for CEx. Variables x - the ID of the booting CE Severity Informational Description The specified CE began the boot process. The boot process occurs immediately after the CE is powered on. Related Messages IOPn.MtcMon status: The boot process has completed for CEx. IOPn.MtcMon status: The boot process has failed for CEx. Hardware/Software A software process started. Action No action is required. 271