HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 187

Chapter 12 MtcMICX Messages IOPn.MtcMICX: MtcMICX resources have not been returned following a port transition. The system will be rebooted to recover. Severity Error Description Required resources were not returned by client software. These resources must be returned before the IOP is allowed to join the configuration. The system will reboot itself to correct the problem. Action No action is required. The HP NetServer AAsoftware automatically reboots the system to correct the problem. If this problem persists, contact your service provider for assistance. IOPn.MtcMICX: Port state change failed to change the state to the required setting. Severity Error Description MtcMICX attempted to change the state of the MIC port, but the new port state did not match the requested port state. This probably indicates a hardware error; however, an internal software error can also cause this problem. The additional data specifies the MIC port number where the problem occurred. Action The HP NetServer AA software automatically reboots the IOP. IOPn.MtcMICX: Port state change not allowed. MtcMICX has detected a flow control discrepancy. Severity Error Description MtcMICX has detected a flow control discrepancy, meaning that resources belonging to MtcMICX have not been returned by one or more HP NetServer AA providers. This is an internal software error. Action The IOP should reboot automatically. If it does not do so, or if this error recurs, contact your service provider for assistance. 177