HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 286

Chapter 13 MtcMon Messages IOPn.MtcMon status: The CE CPUx stepping IDs do not match. CE1 CPU ID register = 0xy. CE2 CPU ID register = 0xz. Variables x - the ID of the incompatible CPUs y - the contents of the Intel Pentium CPU ID register of CE1 z - the contents of the Intel Pentium CPU ID register of CE2 Severity Warning Description The revisions (stepping IDs) of the Intel Pentium processors in the two CEs do not match. This does not prevent the CEs from synchronizing, but because the revisions (stepping IDs) are not identical, the CEs may not execute continuously in lockstep. Hardware/Software A difference has been detected between the Intel Pentium processors on the CE motherboards. Action If the event log indicates that a CE is periodically removed from service, it may be necessary to replace one or both CE motherboards so that both CE motherboards contain Intel Pentium processors that have identical family numbers, model numbers, and stepping IDs. IOPn.MtcMon status: The CE MIC BIOS revisions are not compatible. CE1 MIC BIOS revision = x. CE2 MIC BIOS revision = y. Variables x - the revision of the MIC module BIOS in CE1 y - the revision of the MIC module BIOS in CE2 Severity Error Description The revisions of the BIOS in the CE MICs are not compatible. The major and minor version numbers of the revisions must match exactly for the CEs to synchronize. Hardware/Software This message is generated as a result of a difference between the BIOS revisions of the MIC modules in the CEs. Action To resolve this condition, run the MTCFLASH Utility to update the BIOS revision on one or both CEs. Refer to Chapter 9 in HP NetServer AA Solution Administrator's Guide for information. 276