HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 273

Chapter 13 MtcMon Messages IOPn.MtcMon status: IOPx is unavailable for initialization because it is currently FAULTED. Variables x - the ID of the IOP that is unavailable for initialization Severity Warning Description This message is generated during IOP initialization when the Endurance software is loaded. The specified IOP is in a faulted state and is not available for configuration into the Endurance server. If the other IOP is not disabled or faulted, the CE is booted when it is powered up. Related Messages IOPn.MtcMon status: IOPx is faulted and requires repair. Hardware/Software This message is generated during boot when the IOP was previously marked as faulted. This may have occurred due to a software or a hardware error. Action Examine the event logs to determine the reason that the IOP was previously faulted. Enable the IOP by issuing an IOP Enable Operation command. IOPn.MtcMon status: IOPx joining has been aborted because the thresholding database was modified. IOP initialization and joining will be retried. Variables x - the ID of the IOP whose joining has been aborted Severity Warning Description This message is generated during IOP joining if a system error occurs that causes a change to the threshold database while it was being copied to the joining IOP. IOP joining is terminated and restarted. Related Messages IOPn.MtcMon status: The join process has failed for IOPx. Hardware/Software This message is generated in response to a hardware or software error that occurred during IOP joining. Action No action is required. IOP joining is restarted automatically. 263