HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 92

Chapter 4 MtcCEX Messages MtcCEX: Unable to complete initialization. Status = 0xy Variables y - an error status displayed in hexadecimal Severity Error Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE during CE operating system boot when the HP NetServer AA CE Transport experiences an unexpected failure during its initialization while completing initialization of the MIC adapter and the CE Transport driver. The CE operating system boot terminates. Related Messages MtcCEX: MIC adapter is not configured for CE operation. This message indicates a hardware failure in the CE MIC, but may also be due to a software resource failure. Action • Verify that the CE MIC is properly installed, configured, and passes its self-test. • Replace the MIC adapter if necessary. • If this fails to solve the problem, reinstall the CE root, and reinstall the HP NetServer AA software. • If the problem persists, contact your service provider for assistance. MtcCEX: Unable to complete synchronization-related initialization. Status = 0xy Variables y - an error status displayed in hexadecimal Severity Error Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE during CE operating system boot when the HP NetServer AA CE Transport experiences an unexpected failure during its initialization while attempting to allocate system resources for CE synchronization. The CE operating system boot terminates. Hardware/Software This message indicates either a software failure, most likely a Windows NT root that is not properly installed, or a lack of sufficient system memory. Action • Verify that the CE's system memory meets the HP NetServer AA size requirements, and increase it if necessary. • If this fails to resolve the problem, rebuild the CE root, and reinstall the HP NetServer AA software. • If the problem persists, contact your service provider for assistance. 82