HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 185

Chapter 12 MtcMICX Messages (Continued) Code 14 15 16 17 18 19 1A 1B 1C Description Action Transport registration failed On startup, MtcMICX attempts to register with the HP NetServer AA Monitor. This message indicates that the registration attempt failed. MtcMICX is not loaded, and the IOP cannot join the HP NetServer AA configuration. Note: The status code returned by the HP NetServer AA Monitor on the registration attempt is also logged as additional data. • Reinstall the HP NetServer AA software on the IOP. • If this does not resolve the problem, contact your service provider for assistance. Cannot claim resources Cannot initialize timeouts Cannot find the MIC adapter Cannot map the MIC packet buffer Cannot translate the MIC packet buffer Attempt to resolve these problems in the following ways: • Verify that the MIC adapter is properly installed. • Verify that the MIC is running the firmware that is shipped with the version of the HP NetServer AA software that is running on the IOP. • Reinstall the HP NetServer AA software on the IOP. • Replace the MIC adapter and install the proper firmware on the new adapter. • If the problem persists, contact your service provider for assistance. Cannot connect interrupt. Note: The additional data specify the Windows NT status code of the failure. Cannot get configuration. Note: The additional data specify the Endurance status code of the failure. Cannot enable features. Note: The additional data specify the Endurance status code of the failure. 175