HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 317

Chapter 14 MtcScsiP and MtcScsiR Messages IOPn.MtcScsiP status: Cannot obtain geometry data for DISKn, and it will be marked offline. Variables n - the disk number; for example, DISK0, DISK1, DISK2 Severity Error Description The SCSI Provider was unable to get required size characteristics from the disk controller. The disk will not be usable until the problem is corrected. Action Make sure the disk drive is present and turned on. If the disk is part of a RAID configuration, use your RAID configuration tool and verify the configuration parameters. IOPn.MtcScsiP status: Cannot obtain SCSI cache mode page for DISKn. This is typical for RAID controllers. Variables n - the disk number; for example, DISK0, DISK1, DISK2 Severity Informational Description The SCSI Provider requests SCSI cache mode page data from disk controllers. SCSI cache mode page data contains disk characteristics and configuration information. Many RAID adapters do not provide this information for the disks included in their configurations. This information is not required for correct operation. Action No action is required. IOPn.MtcScsiP status: Cannot obtain SCSI mode page data for DISKn. This is typical for RAID controllers. Variables n - the disk number; for example, DISK0, DISK1, DISK2 Severity Informational Description The SCSI Provider requests SCSI mode page data from disk controllers. SCSI mode page data contains disk characteristics and configuration information. Many RAID adapters do not provide this information for the disks included in their configurations. This information is not required for correct operation. Action No action is required. 307