HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 65
Negotiating HP NetServer AA startup with IOP, Upon exiting the setup utility
![]() |
View all HP NetServer AA 6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 2 MIC BIOS Messages Negotiating HP NetServer AA startup with IOPx. . . Variables x - the ID of the IOP with which communication has been established and the startup process is beginning Severity Informational Description Communication has been established with the specified IOP, and the startup process is beginning. Action No action is required. No MIC identity found: A MIC identity must be assigned and saved. Press to continue. Severity Informational Description The MIC element identity (CE1, CE2, IOP1, IOP2) has not been specified in non-volatile memory (or has been reset to the "Unknown" setting). Action • Select the appropriate element identity. • Save the setting in non-volatile memory. • Upon exiting the setup utility, reboot the appropriate element to reinitialize the firmware to the new setting. Performing client tests. Please ensure remote port(s) are in server mode. Severity Informational Description For a client test, the ports to be included in the test must be physically connected and listening in server mode. Action When the remote port(s) are in server mode, press any key to continue the test. Performing external loopback tests. Please ensure MIC ports are connected. Severity Informational Description For an external loopback test, the MIC ports must be connected with a fiber cable. Action When the ports are connected, press any key to continue the test. 55
![](/manual_guide/products/hewlettpackard-netserver-aa-4000-hp-netserver-aa-6200-solution-release-30-messages-13dd408/65.png)