HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 276

Chapter 13 MtcMon Messages IOPn.MtcMon status: IOPx was removed from service to allow the CE operating system to be booted. Variables x - the ID of the IOP that was removed Severity Error Description The specified IOP was removed from the Endurance server configuration to allow the CE operating system to boot. This action is taken because the IOP that was removed could not communicate with any of the available CEs; as a result, it was preventing the CE operating system from being booted. Related Messages IOPn.MtcMon status: IOPx has been removed from service. IOPn.MtcMon status: The boot process has started for CEx. Hardware/Software This message is typically generated as a result of a hardware error on a CE-to-IOP Interconnect. Action • Examine the Interconnect between the specified IOP and the CEs. • Manually repair the Interconnect and allow the IOP to rejoin the configuration. IOPn.MtcMon status: Monitor initialization failed on the local IOP. Severity Error Description The Monitor could not initialize. The IOP is not activated. Hardware/Software This message occurs as a result of a software problem. Action • This message is generated as a result of a problem with the Endurance software configuration and indicates that the Endurance software is not properly installed. This usually occurs because the Windows NT Registry information for the Endurance software is corrupt. • This message might also be generated if a Monitor subcomponent detects a resource error that prevents it from successfully initializing. The Endurance software should be reinstalled on the IOP. • If the condition persists, disable the IOP to allow the Endurance server to operate, and contact your service provider for assistance. 266