HP NetServer AA 6200 HP NetServer AA 6200 Solution Release 3.0 Messages - Page 244

Chapter 13 MtcMon Messages IOPn.MtcMon status: CE synchronization cannot be performed at this time. Windows NT is not fully loaded. The operation will be retried at a later time. Severity Warning Description Because the Windows NT operating system is not completely loaded on the CE, synchronization cannot be performed. Hardware/Software This message is generated as a result of a software condition that exists in the CE operating system. Action • CE synchronization is retried automatically. If Windows NT has completed loading by that time, synchronization is performed. • If the condition persists, synchronization cannot be performed. In this case, contact your service provider for assistance. IOPn.MtcMon status: CE synchronization process aborted due to time out. Severity Error Description The CE synchronization aborted because the operation timed out. The CE synchronization timeout is a factor of the memory sizes of the CEs. Synchronization timeouts are typically the result of a failure of the synchronization slave CE. Related Messages IOPn.MtcMon status: The synchronization process has started for CEx. IOPn.MtcMon status: The synchronization process has failed for CEx. IOPn.MtcMon status: CEx has been removed from service. Hardware/Software This message is typically due to a physical failure of the CE synchronization slave CE specified in the message. Action • Synchronization is retried automatically. If synchronization cannot be performed after multiple retries, the slave CE is faulted and must be repaired or replaced. • Examine the event log of the slave CE to determine why it is not capable of synchronization. 234