Ricoh 3035 General Settings Guide - Page 155

Staple unit for saddle stitch function ZBQP070E d Adding Staples • 1: Open the front bottom cover of the finisher. • 2: Pull lever R7 and fully pull out the staple unit. • 3: Lift the lever of the staple unit while pulling it. • 4: Take out the empty cartridge. ZBQP080E • 5: Set the new cartridge. • 6: Bring the staple unit back into place. • 7: Close the front bottom cover of the fin- 6 isher. ZBQP090E ❖ Using "Prepare Stapling "in User Tools to initialize the staple unit When the booklet finisher is installed, make sure to initialize the staple unit for the saddle stitch function with User Tools after adding staples or removed jammed staples. If you do not do this, copies may not be stapled and misfeeds may occur. Reference p.58 "Prepare Stapling" A Press the {User Tools/Counter} key. B Press [System Settings]. C Press [Prepare Stapling ]on the menu of General Features 2/2. D Press [OK]. The machine staples five to seven times without ejecting staples. E Press [Exit]. F Press [Exit]. 143