Ricoh 3035 General Settings Guide - Page 41

Turning On the Power -When the fax unit (optional) is installed Saving Energy When the main power switch is turned off while using the fax func- -Energy Saver Mode 1 tion, waiting fax and print jobs may be canceled, and incoming fax documents not received. If you have to turn off this switch for some reason, keep the following points in mind: If you do not use the machine for a certain period after an operation, or when you press the {Energy Saver} key, the display disappears and the machine goes into Energy Saver Important ❒ Make sure 100% is shown as available memory on the display before turning off the main power switch or unplugging the power cord. Fax mode. When you press the {Energy Saver} key again, the machine returns to the ready condition. The machine uses less electricity in Energy Saver mode. files in memory are deleted an Note hour after you turn off the main power switch or unplug the power cord. See "Turning Off the Main Power/In the Event of Power Failure", Facsimile Reference . ❒ You can change the amount of time the machine waits before switching to Energy Saver mode after copying has finished or the last operation is performed. See p.62 "Panel Off Timer". ❒ The On indicator does not go out, but blinks in dial-in mode even if you press the operation switch. When this happens, check the ex- planations below, and turn off the main power switch. • the computer is not controlling the machine. • the machine is not receiving a fax. 29