Ricoh Aficio SP 5200S Fax Guide - Page 63

Placing Originals Acceptable Original Sizes This section describes the size and thickness limitations that apply to originals placed on the exposure glass or the ADF. 1 Original sizes and thickness Where original is set Acceptable original size Maximum number of sheets Paper thickness Exposure glass Up to A4 (210 × 297 mm), 1 sheet 81/2 × 11 (216 × 279 mm) ADF, one-sided original A5 to A4 (up to 1,200 mm long) 51/2 × 81/2 14 to 81/2 × 50 sheets: Less than 80 g/ m2 (21 lb. Bond)*1 52 128 g/m2 (14 34 lb. Bond) ADF, two-sided original A5 to A4 (up to 356 mm long) 51/2 × 81/2 14 to 81/2 × 50 sheets: Less than 80 g/ m2 (21 lb. Bond)*1 60 105 g/m2 (16 28 lb. Bond) *1 Above specification depends on the paper type and condition • You can use documents longer than 356 mm (14 inches) with the User Parameter (switch 14, bit 1) in the Parameter Settings. For details about Parameter Setting, see "Parameter Settings". • p.375 "Parameter Settings" Paper Size and Scanned Area This section explains the size of the area the machine can scan. • There may be a difference in the size of the image when it is printed at the destination. • Even if an original is correctly placed on the exposure glass or in the ADF, a margin of 3 mm (0.1 inches) around each edge of the original may not be sent. 61