Samsung SPH-P500 User Manual Ver.li6_f7 (English(north America)) - Page 43
VPN, Activate a Connection, Assign a Unique Name
View all Samsung SPH-P500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Activate a Connection 1. Press and tap > > More settings. 2. Tap the ON/OFF slider to turn Wi-Fi direct On . 3. Tap Wi-Fi Direct to set up a peer-to-peer connection over Wi-Fi. While Wi-Fi Direct mode is On, Wi-Fi Direct is on displays in the Status bar. Note: The target device must also have Wi-Fi Direct service active and running before it can be detected by your device. Assign a Unique Name 1. Press and tap > > More settings > Wi-Fi Direct. 2. Tap > Device name. 3. Modify the current name and then tap OK. VPN If you want to send and receive email messages through an ISP (Internet Service Provider) account (such as Outlook), or if you wish to use your device to access your corporate email through a VPN (Virtual Private Network), you will first need to set up an IMAP or POP account. Before you add a VPN you must determine which VPN protocol to use: PPTP, L2TP/IPSec PSK, L2TP/IPSec RSA, IPSec Xauth PSK, IPSec Xauth RSA, or IPSec Hybrid RSA. Note: You must configure a PIN or alphanumeric password before using credential storage functions. 1. Press and tap > > More settings. 2. Tap VPN > Add VPN network. 3. Enter a name for the VPN network in the Name field. 4. Select a VPN type from the Type drop-down menu. The options are: PPTP (Point-to-Point Tunneling Protocol) L2TP/IPSec PSK (Layer 2 Tunneling Protocol / Internet Protocol Security Pre-Shared Key) Settings 33