HP 5500dn HP Designjet 5500 series printers - Quick Reference Pocket Guide - Page 121

pocket.book Page 119 Friday, June 28, 2002 4:31 PM 119 - change the ink system troubleshooting troubleshooting This section describes problems you could encounter after changing the ink system and provides details on how solve them. Problem The front panel displays the following message after completing its initialization process: WARNING Switch power off Check printhead path Reason and solution You have installed the ink tubes twisted, not attached, or not correctly positioned in the tube guide. a Switch off the printer. b Install the ink tubes correctly (see step 6 on page 107). c Switch on the printer. You have installed ink tubes designed for a 42-inch (1.07-m) printer into a 60-inch (1.52-m) printer. Remove the ink tubes and install the correct size for your printer. You have installed ink tubes designed for a 60-inch (1.52-m) printer into a 42-inch (1.07-m) printer. Remove the ink tubes and install the correct size for your printer. CHANGE THE INK SYSTEM