HP 5500dn HP Designjet 5500 series printers - Quick Reference Pocket Guide - Page 156

pocket.book Page 14 Friday, June 28, 2002 4:31 PM 14 - front-panel messages front-panel messages Status Reset Web Passwd Setup Sheet misaligned. Lift lever to align with blue line or to remove media. Sheet required for calibration Description This is displayed when you are resetting your WebAccess password. The setup message is displayed when new tubes have been installed into the printer and you have installed the correct setup printheads This printing material has not been fed into the printer straight. The printer is prompting you to load printing material (at least D-sized) so that it can perform a calibration. Procedure When the setting-up of the tube system is complete, the front panel will display a message asking you to remove the setup printheads and replace with 'normal' printheads. Reload the printing material making sure that the edges are parallel and that it is straight when you feed it in. Align the material coming out from the printer with the material going into the printer. See loading a roll into the printer on page 34 in the reverse of this guide. To see loading sheets on page 54 in the reverse of this guide.