HP 5500dn HP Designjet 5500 series printers - Quick Reference Pocket Guide - Page 197

pocket.book Page 55 Friday, June 28, 2002 4:31 PM 55 - ink supply to correct the problem. To interpret the error codes, refer to status code interpretation on page 2. There are three action messages: (error code) Replace The Replace message means that you must remove the consumable and replace it with a new one. Since the only action that you can do is to remove and replace with a new part or the correct part, the error code is given mainly for use by a support technician. For the removal procedure, see printhead removal on page 73 in the reverse of this guide. (error code) Reseat The Reseat message means that the electrical connection between the printhead and the carriage assembly is not good. 1. The printhead needs to be removed and inserted again. 2. If this is unsuccessful, the printhead and/or carriage may need to be cleaned. See carriage interconnect wiper on page 58. 3. If this is also unsuccessful, replace the part. ink system error/status messages (error code) Recover The Recover message is shown on the printhead information screen. Recovery is an optional procedure that you can use if the image quality is unacceptable. If after this the image quality has not improved sufficiently, try another recovery. If this still doesn't work, replace the part. For details of how to perform this procedure, see recovery procedure on page 56. INK SUPPLY