HP 5500dn HP Designjet 5500 series printers - Quick Reference Pocket Guide - Page 185

pocket.book Page 43 Friday, June 28, 2002 4:31 PM 43 - image quality aligning the printheads The printhead alignment selection causes the printer to align the printheads immediately; or, if an image is being printed, as soon as the current print job is finished. The alignment procedure requires a minimum paper size of A1/D-size (24 inches). To perform the printhead alignment procedure go to Utilities/ Calibrations/Printhead Alignment. You can use this feature if the print quality print indicates an alignment error. Refer to using the image quality print on page 31. The printer will automatically perform an alignment when printheads are replaced, unless you have turned off this behavior from the front panel: Internal RIP Setting > Align Calibration > Off. calibrating the color output IMAGE QUALITY