HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 100

2 cfgDisable cfgDisable Disables a zone configuration. Synopsis cfgdisable Description Use this command to disable the current zone configuration. The fabric returns to nonzoning mode, in which all devices see each other. This command ends and commits the current zoning transaction buffer to both volatile and nonvolatile memory. If a transaction is open on a different switch in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message is displayed on the other switches to indicate the aborting of the transaction. If the default zone access mode is "No Access", then this command becomes cfgEnable "d_efault_Cfg". See defZone. This command requires a Brocade Advanced Zoning license. When security is enabled, this command can be issued only from the primary FCS switch. Operands none Examples To disable the current zone configuration: switch:admin> cfgdisable You are about to disable zoning configuration. This action will disable any previous zoning configuration enabled. Do you want to disable zoning configuration? (yes, y, no, n): [no] y See Also cfgClear, cfgEnable, cfgSave 68 Fabric OS Command Reference Manual 53-1000436-01