HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 778

3 ISL Trunking Commands ISL Trunking Commands The following commands are available with the purchase of a Brocade ISL Trunking license key. For more detailed information about trunking refer to the Fabric OS Administrator's Guide. TABLE 5 Brocade Trunking Commands Command Description portCfgTrunkPort switchCfgTrunk trunkDebug Configures a port for trunking. Configures a switch for trunking. Debugs a trunk link failure. Advanced Performance Monitoring Commands The following commands are available with the purchase of a Brocade Advanced Performance Monitoring license key. TABLE 6 Performance Monitoring Commands Command Description perfAddEEMonitor perfAddIPMonitor perfAddReadMonitor perfAddRWMonitor perfAddSCSIMonitor perfAddUserMonitor perfAddWriteMonitor perfCfgClear perfCfgRestore perfCfgSave perfClearAlpaCrc perfClearEEMonitor perfClearFilterMonitor perfDelEEMonitor Adds an end-to-end monitor to a port. Adds an IP monitor to a port. Adds a SCSI Read monitor to a port. Adds a SCSI Read and Write monitor to a port. Adds a SCSI traffic frame monitor to a port. Adds a user-defined monitor to a port. Adds a SCSI Write monitor to a port. Clears the performance monitoring settings from flash memory. Restores performance monitoring settings from flash memory. Saves the current performance monitoring settings to flash memory. Clears an AL_PA device CRC count by the port and AL_PA. Clears statistics counters of an end-to-end (EE) monitor on a port. Clears statistics counters of a filter-based monitor. Deletes an end-to-end monitor on port. 746 Fabric OS Command Reference Manual 53-1000436-01