HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 665

snmpMibCapShow 2 snmpMibCapShow Displays options for configuring SNMP MIB trap capability. Synopsis snmpmibcapshow Description Use this command to display the SNMP MIBs and traps capability of the SNMP agent in the switch. FA-MIB Specifying yes means the user can access FA-MIB variables with an SNMP manager. The default value is yes. FICON-MIB Specifying yes means the user can access FICON-MIB variables with an SNMP manager. The default value is yes. HA-MIB Specifying yes means the user can access Entity-MIB and HA-MIB variables with an SNMP manager. The default value is yes. SW-TRAP Specifying yes means the SNMP management application can receive SW-TRAPS from the switch. The default value is yes. Users can also turn on or off individual SW Traps. The individual SW traps are swFCPortScn, swEventTrap, swFabricWatchTrap and swTrackChangesTrap. FA-TRAP Specifying yes means the SNMP management application can receive FA-TRAPS from the switch. The default value is yes. Users can also turn on or off individual FA Traps. The individual FA Traps are connUnitStatusChange, connUnitEventTrap, connUnitSensorStatusChange and connUnitPortStatusChange. SW-EXTTRAP Specifying yes means user can receive SSN in the SW traps. The default value is 'no'. FICON-TRAP Specifying yes means the SNMP management application can receive FICON traps from the switch. The default value is 'yes'. Users can also turn on or off individual FICON Traps. The individual FICON Traps are linkRNIDDeviceRegistration, linkRNIDDeviceDeRegistration, linkLIRRListenerAdded, linkLIRRListenerRemoved and linkRLIRFailureIncident. HA-TRAP Specifying yes means the SNMP management application can receive HA traps from the switch. The default value is 'yes'. Users can also turn on or off individual HA Traps. The individual HA Traps are fruStatusChanged, cpStatusChanged, and fruHistoryTrap. agtCfgDefault also resets the SNMP MIB and trap capability to default along with other SNMP agent configuration. The values can be changed, if user download the configuration data through configDownload command. All the new values successfully configured by snmpMibCapSet command takes effect immediately. If SNMP MIB is disabled, then the corresponding traps are disabled. If any trap group is disabled then the corresponding individual traps also are disabled. The FE and SW MIBs always are accessible. snmpMibCapSet does not prompt the user to turn on or off these MIBs. Fabric OS Command Reference Manual 633 53-1000436-01