HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 98

2 cfgCreate cfgCreate Creates a zone configuration. Synopsis cfgcreate "cfgName", "member; member" Description Use this command to create a new zone configuration. A zone configuration name must begin with a letter that can be followed by any number of letters, numbers, and underscores. Names are case sensitive: for example, "Cfg_1" and "cfg_1" are different zone configurations. Blank spaces are ignored. The zone configuration member list must have at least one member. Empty member lists are not allowed. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to become effective, an appropriate zone configuration must be enabled using the cfgEnable command. Refer to the zoneCreate command for more information on name and member specifications. This command requires a Brocade Advanced Zoning license. When security is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: "cfgName" Specify a name for the zone configuration, in quotation marks. This operand is required. "member" Specify a zone member or list of zone members to be added to the configuration, in quotation marks and separated by semicolons. This operand is required. Members can be specified in one or more of the following ways: • Zone names • QuickLoop names • FA (Fabric Assist) zone names Examples To create a configuration containing three zones: switch:admin> cfgcreate "USA_cfg", "Red_zone; Blue_zone; Green_zone" See Also cfgAdd, cfgClear, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow 66 Fabric OS Command Reference Manual 53-1000436-01