HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 407

nbrStatsClear 2 nbrStatsClear Resets FSPF interface counters. Synopsis nbrstatsclear [slotnumber/][portnumber] Description Use this command to reset the counters of FSPF frames transmitted and received on each interswitch link (ISL) or a specific ISL. These counters display using the using the interfaceShow command. Use this command without operands to reset counters on all interfaces. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: slotnumber For bladed systems only, specify the slot number of the port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, FSPF statistics are reset. When this command is specified with no operand, the statistics are cleared for all interfaces. Examples To reset the counters on a port: switch:admin> interfaceshow 1/0 idbP = 0x10050a38 Interface 0 data structure: nghbP ifNo masterPort defaultCost cost delay = 0x1004ce68 = 0 = 0 (self) = 500 = 500 = 1 (output truncated) nCmdAcc nInvCmd nHloIn nInvHlo nLsuIn nLsaIn attHloOut nHloOut attLsuOut nLsuOut attLsaOut nLsaOut = 37 = 0 = 10 = 0 = 17 = 10 = 11 = 11 = 12 = 12 = 17 = 17 switch:admin> nbrstatsclear 1/0 switch:admin> interfaceshow 1/0 idbP = 0x10050a38 Fabric OS Command Reference Manual 375 53-1000436-01