HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 490
Open McDATA Fabric 1.0 mode and Brocade Interop mode., Specify the Port mode.
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 490 highlights
2 portCfgEXPort -e edtov Specify the E_D_TOV used for port negotiation. Valid values are 1000 60000. This operand is only applicable if the "Fabric Parameter" attribute value is not "Auto Negotiate". -d domainid Specify the preferred domain ID. Valid values are 1-239. -p pidformat Specify the Port ID format. Valid values are 0-native, 1-core, 2-extended edge. This operand is applicable only when port mode is set to 0 (native mode). If port mode is not "Brocade Native", the Port ID format displays as "Not applicable". -t fabric_parameter Specify whether to enable or disable negotiation of the fabric parameters. Valid values are 1-enable, 2-disable. -m port mode Specify the Port mode. The -m option will enforce the same port mode for all the ports connected to the same edge fabric. If -m option is selected, the port mode will be compared against the online ports. If the modes are different, an error message will be posted, and the command will fail. Valid values are as follows: 0 Brocade Native mode. 1 Open McDATA Fabric 1.0 mode (and Brocade Interop mode). 2 McDATA Fabric mode, used when the neighboring McDATA switch is running OS version such as 6.0.2 or later. 3 McDATA Fabric Legacy mode, for legacy McDATA OS versions such as 5.0.2. Examples To display the EX_Port configuration of port 2/0: switch:admin> portcfgexport 2/0 Port 2/0 info Admin: enabled State: OK Pid format: core(N) Operate mode: Brocade Native Edge Fabric ID: 16 Front Domain ID: 160 Front WWN: 50:06:06:9e:20:9f:ce:10 Principal Switch: 7 principal WWN: 10:00:00:60:69:c0:05:8a Fabric Parameters: Auto Negotiate R_A_TOV: 9000(N) E_D_TOV: 2000(N) Edge fabric's primary wwn: N/A Edge fabric's version stamp: N/A To set the fabric ID of port 2/1 to 5 and the port ID format to core: switch:admin> portcfgexport 2/1 -f 5 -p 1 To configure port 2/0 to be an EX_Port and set the fabric ID to 4: switch:admin> portcfgexport 2/0 -a 1 -f 4 To disable fabric parameter negotiation on port 2/0 of an EX_Port: 458 Fabric OS Command Reference Manual 53-1000436-01