HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 355

iscsiPortCfg 2 iscsiPortCfg Displays or modifies iSCSI port parameters. Synopsis iscsiportcfg --clearstats slot/geport iscsiportcfg --default slot/geport iscsiportcfg --show slot/geport [-v] iscsiportcfg --modify slot/geport options Description Use this command to display or modify the iSCSI port parameters. The following table lists the default iSCSI port settings. Setting Default Error recovery level 0 Connections per session 1 Data digest support Disabled Header digest suppor Disabled Immediate data support No First burst length value 512 The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: --modify Modifies the port parameters on the specified port. Valid options are: -e value Specifies the error recovery level; values are 0, 1, or 2. -c value -d value to enable. -a value -i value -f value Specifies the TCP of connections; values are 1 or 2. Enables or disables data digest support; specify 0 to disable or 1 Enables or disables header digest support; specify 0 to disable or 1 to enable. Enables or disables immediate data support; specify 0 to disable or 1 to enable. Specifies the first burst length value; values include 512, 1024, 2048, 4096, 8192, 16384, and 32768. --clearstats Clears port-level iSCSI statistics on the specified port. --default Resets the port to the default values. See the "Description" section for the list of default values. --show Displays port-level protocol parameters, statistics, and session information on the specified port. Options include: -v Specifies verbose mode, which displays the initiator IP, TSID, and the number of connections in addition to the other port-level information. slot Specifies the slot number. Fabric OS Command Reference Manual 323 53-1000436-01