HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 702
switchCfgTrunk
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 702 highlights
2 switchCfgTrunk switchCfgTrunk Enables or disables trunking on all the ports of a switch. Synopsis switchcfgtrunk mode Description Use this command to enable or disable trunking on all the ports of a switch. This command requires the Brocade ISL Trunking license. You can disable or enable trunking using the portCfgTrunkPort or switchCfgTrunk commands. When the command is executed to update the trunking configuration, the ports for which the configuration applies are disabled and reenabled with the new trunk configuration. As a result, the traffic through these ports might be disrupted for a short period of time. You can disable trunking on the ports even though the ISL Trunking license is not installed. Operands This command has the following operand: mode Specify 1 to enable trunking on all the ports on this switch. Specify 0 to disable trunking on all the ports on this switch. This operand is required. Examples To enable trunking on a switch: switch:admin> switchcfgtrunk 0 Committing configuration...done. See Also portCfgShow, portCfgTrunkPort, portShow, switchShow 670 Fabric OS Command Reference Manual 53-1000436-01