HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 191

fabricShow 2 fabricShow Displays fabric membership information. Synopsis fabricshow Description Use this command to display information about switches in the fabric. If the switch is initializing or is disabled, the message "no fabric" is displayed. In the case of a mixed fabric, fabricshow must be run from a 5.3.0 switch; otherwise, IPV6 information is lost because switches prior to 5.3.0 do not recognize an IPV6 configured switch. Running this command on an FCR or edge fabric will not give any router information; running this command on edge switch will give router information. If the fabric is reconfiguring, some or all switches might not be displayed; otherwise, the following fields are displayed: Switch ID The switch Domain_ID and embedded port D_ID World Wide Name The switch WWN Enet IP Addr The switch Ethernet IP address for IPv4 and IPv6 configured switches. For IPv6 switches, only the static ipaddress displays. FC IP Addr The switch FC IP address Name The switch symbolic name. An arrow (>) indicates the principal switch. FC Router IP Addr The IP address of the FC router. This field will be empty if the switch is not an FC Router of it the FC Router does not support it. FC Router Name The FC Router symbolic name. This field will be empty if the switch is not an FC Router of it the FC Router does not support it. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: -m Displays fabric membership information with additional details of the FC Router, if present in the fabric. Examples The following example illustrates a fabric of four switches. "sw180" is the Principal switch. Three of the switches are configured to run IP over Fibre Channel. switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 64: fffc40 10:00:00:60:69:00:06:56 192.168.64.59 192.168.65.59 "sw5" 65: fffc41 10:00:00:60:69:00:02:0b 192.168.64.180 192.168.65.180 >"sw180" 66: fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60" 67: fffc43 10:00:00:60:69:10:60:1f 192.168.64.187 0.0.0.0 "sw187" The Fabric has 4 switches To show a mixed fabric with an IPv4 and IPV6 configured switches: sw5:admin> fabricShow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name Fabric OS Command Reference Manual 159 53-1000436-01