HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 518

2 portEnable portEnable Enables a port. Synopsis portenable [slotnumber/]portnumber Description Use this command to enable a port. If the port is connected to another switch, the fabric might reconfigure. Devices connected to the port can now communicate with the fabric. For ports that come online after being enabled, the following indications might be sent to indicate a state transition: RSCN, SNMP trap, Web pop-up window. This command is rejected if the port's switch is disabled, the port's blade is not fully enabled (faulted, powered off, or disabled), or if the port itself is persistently disabled. The front panel LED of an enabled and online port is green. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operand: slotnumber For bladed systems only, specify the slot number of the port to be enabled, followed by a slash (/). portnumber Specify a port number to be enabled, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Examples To enable a port: switch:admin> portenable 2/4 See Also portCfgPersistentDisable, portCfgPersistentEnable, portDisable, portShow, switchShow 486 Fabric OS Command Reference Manual 53-1000436-01