HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 415

nscamShow 2 nscamShow Displays information about remote devices in the Name Server (NS) cache. Synopsis nscamshow [-t] Description Use this command to display the local NS cache information about the devices discovered in the fabric by the NS cache manager. The message "No Entry found!" displays if the NS cache manager does not discover new switches or new devices in the fabric. For each remote switch found, the output of this command displays the domain number, state, revision, owner, and a list of devices for that domain number. For each device found in the devices list, the following information is displayed: Type U for unknown, N for N_Port, NL for NL_Port Pid The 24-bit Fibre Channel address COS A list of classes of service supported by the device PortName The device's port World Wide Name (WWN) NodeName The device's node WWN Permanent Port Name Physical N_Port or NL_Port WWN There might be additional lines if the device has registered FC4s, fabric port name, or port and node symbolic name. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands The operand is as follows: -t Specify to display the device type. Of the two device type parts, the first part indicates the origination of the device. Currently, four originations are defined: Physical Device connected to the Nx_Port, using FLOGI to login to the switch Virtual Contrived device by the switch NPV Device connected to the Nx_Port, using FDISC to log in to the switch iSCSI Device connected to the iSCSI port The second part indicates the role of the device. Currently, four roles are defined: Unknown (initiator/target) Device role is not detected Initiator An SCSI initiator Target An SCSI target Initiator+Target Both an SCSI initiator and an SCSI target Examples To display all switch and device entries discovered by the NS in the fabric: switch:admin> nscamshow Fabric OS Command Reference Manual 383 53-1000436-01