HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 178

2 errDelimiterSet errDelimiterSet Sets the error log start and end delimiter for messages sent to the console and syslog. Synopsis errdelimiterset [-s "start delimiter string"][-e "end delimiter string"] Description Use this command to set the error log start and end delimiter for log messages sent to the console and syslog. An empty string clears the start and the end delimiters (including the colon) so that they are not displayed. If no arguments are supplied to the command, it instead displays the existing errDelimiterSet configuration. These delimiters are stored persistently. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: -s "start delimiter string" Specify the alphanumeric string for the start delimiter; up to 10 characters are allowed. This operand is optional. -e "end delimiter string" Specify the alphanumeric string for the end delimiter; up to 10 characters are allowed. This operand is optional. Examples To display the start and end delimiter: switch:admin> errdelimiterset delimiter start string: delimiter end string: See Also To change the start and end delimiter (with sample output): switch:admin> errdelimiterset -s "Start" -e "End" Start2003/03/10-09:54:03, [NS-1002], 1035,, ERROR, SWITCH43, Name Server received an invalid request from device 10:02:32:A3:78:23:23:End errDump, errFilterSet, errShow 146 Fabric OS Command Reference Manual 53-1000436-01