HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 683

supportFfdc 2 supportFfdc Modifies or displays first-fault data capture (FFDC) daemon. Synopsis supportffdc [--disable | --enable | --show] Description Use this command to disable or enable the FFDC events, or display the current configuration. If disabled, the daemon does not capture any data even when a message with FFDC attributes is logged. FFDC is enabled by default. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: --disable Disables the FFDC. --enable Enables the FFDC. --show Displays the FFDC configuration parameters. Without operands, the command syntax is displayed. Examples To display the FFDC configuration: switch:admin> supportffdc --show First Failure Data Capture (FFDC) is disabled. To enable the FFDC events: switch:admin> supportffdc --enable First Failure Data Capture (FFDC) is enabled. See Also none Fabric OS Command Reference Manual 651 53-1000436-01