HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 718

2 switchStatusShow switchStatusShow Displays overall switch status. Synopsis switchstatusshow Description Use this command to display the overall status for a switch that is configured with IPv4 and IPv6 addresses. In addition, users with a Fabric Watch license are able to view the list of unhealthy ports. This command displays the overall switch status, and the status of the following contributors: Power supplies Temperatures Fans WWN servers (dual CP systems only) Standby CP (dual CP systems only with HA enabled) Blades (bladed systems only) Flash Marginal ports Faulty ports Missing SFPs Status values are HEALTHY, MARGINAL, or DOWN, depending on whether thresholds established by switchStatusPolicySet have been exceeded. The overall status is based on the most severe status of all contributors. Refer to switchStatusPolicyShow for details on the calculation of contributors and overall switch status. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To display a switch health report: To retrieve a switch health report for a switch that is configured with an IPv6 address: switch:user> switchstatusshow Switch Health Report Report time: 09/11/2006 05:39:28 PM Switch Name: switch IP address: 1080::8:800:200C:417A SwitchState: MARGINAL Duration: 80:12 Power supplies monitor Temperatures monitor Fans monitor Flash monitor Marginal ports monitor Faulty ports monitor Missing SFPs monitor HEALTHY HEALTHY HEALTHY MARGINAL HEALTHY HEALTHY HEALTHY 686 Fabric OS Command Reference Manual 53-1000436-01