HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual - Supporting - Page 779

Secure Fabric OS Commands 3 TABLE 6 Performance Monitoring Commands (Continued) Command Description perfDelFilterMonitor perfMonitorClear perfMonitorShow perfShowPortEEMask perfShowAlpaCrc perfShowEEMonitor perfShowFilterMonitor perfShowPortEEMask Deletes a filter-based monitor. Clears counters of end-to-end, filter-based, and ISL performance monitors on a port. Displays end-to-end, filter-based, and ISL monitors on a port. Sets overall mask for end-to-end (EE) monitors. Displays the AL_PA CRC count by port or by AL_PA. Displays user-defined end-to-end monitors on a port. Displays filter-based monitors for a port. Displays the current end-to-end mask of a port. Secure Fabric OS Commands The following commands are available with the purchase of a Brocade Security license key. For more detailed information about security, refer to the Secure Fabric OS Administrator's Guide. TABLE 7 Brocade Secure Fabric OS Commands Command Description pkiCreate pkiRemove pkiShow secActiveSize secAuthSecret secCertUtil secDefineSize secFabricShow secFCSFailover secGlobalShow secHelp secModeDisable secModeEnable secModeShow secNonFCSPasswd secPolicyAbort secPolicyActivate secPolicyAdd secPolicyCreate Creates public key infrastructure (PKI) objects. Removes existing public key infrastructure (PKI) objects. Displays existing public key infrastructure (PKI) objects. Displays the size of the active security database. Manages the DH-CHAP shared secret key information. Manages third-party PKI-based certificates in the switch. Displays the size of the defined security database. Displays security related fabric information. Enables a backup FCS switch to take over as primary FCS switch. Displays the current internal security state information. Displays information about security telnet commands. Disables security mode. Enables security mode. Displays if security mode is enabled or disabled. Sets the admin password for non-FCS switches. Aborts all changes to the defined database that have not been saved. Applies defined policy set to all switches in the fabric. Adds members to an existing policy. Creates a new policy. Fabric OS Command Reference Manual 747 53-1000436-01